Website stats for Thing-printer - thing-printer.com
Kamikaze is a complete Linux software distribution for BeagleBone. It has Redeem, Toggle and OctoPrint pre-installed, so your printer is ready to run directly. Redeem is the "firmware" that runs Replicape. It has been developed with a focus on hackability with only a small code base written in C and optimized for fast execution. ...
thing-printer.com was registered 1 decade 9 months ago. It has a alexa rank of #6,148,648 in the world. It is a domain having .com extension. It is estimated worth of $ 240.00 and have a daily income of around $ 1.00. As no active threats were reported recently, thing-printer.com is SAFE to browse.
Traffic Report
| Daily Unique Visitors: | 143 |
| Daily Pageviews: | 286 |
Estimated Valuation
| Income Per Day: | $ 1.00 |
| Estimated Worth: | $ 240.00 |
Search Engine Indexes
| Google Indexed Pages: | Not Applicable |
| Yahoo Indexed Pages: | Not Applicable |
| Bing Indexed Pages: | Not Applicable |
Search Engine Backlinks
| Google Backlinks: | Not Applicable |
| Bing Backlinks: | Not Applicable |
| Alexa BackLinks: | Not Applicable |
Safety Information
| Google Safe Browsing: | No Risk Issues |
| Siteadvisor Rating: | Not Applicable |
| WOT Trustworthiness: |
 Very Poor
|
| WOT Privacy: |
Very Poor
|
| WOT Child Safety: |
Very Poor
|
Website Ranks & Scores
| Alexa Rank: | 6,148,648 |
| PageSpeed Score: | 42 ON 100 |
| Domain Authority: |
49 ON 100 
|
| Bounce Rate: | Not Applicable |
| Time On Site: | Not Applicable |
Web Server Information
Hosted IP Address:
194.63.249.211
Hosted Country:
NO
Location Latitude:
59.9127Location Longitude:
10.7461Traffic Classification
| Total Traffic: | No Data |
| Direct Traffic: | No Data |
| Referral Traffic: | No Data |
| Search Traffic: | No Data |
| Social Traffic: | No Data |
| Mail Traffic: | No Data |
| Display Traffic: | No Data |
Search Engine Results For thing-printer.com
Front page - Thing-Printer.com
Replicape is a super smart 3D printer controller board. It’s very fast, easily hackable and it has the Internet. It’s also our first product, and we’re extremely proud of it.
Revolve - Thing-Printer.com
Replicape has evolved. The first print captured on tape Impressions so far Hackaday.com Adafriut blog Interview with Thomas Sanlanderer The Ben Heck Show uses Replicape and...
ReFactor - Thing-Printer
It is meant to simplify the lives of new users when they begin using a Thing-Printer controller board. Pre-built images of ReFactor are available for users who want to get up...
Print a Thing
Print a Thing is a crowd-sourced 3D printing service that provices low-cost, quick-turn, and high-quality results for hobbyists, experimenters and entreprenuers.
PrinCube Mobile Printer – TheGodThings
Princube makes precise prints on virtually any materials including paper, metal, textiles, plastics, wood, leather and other building and artistic materials.
Redeem - Thing-Printer.com
Redeem is the "firmware" that runs Replicape. It has been developed with a focus on hackability with only a small code base written in C and optimized for fast execution. That...
Recore - Thing-Printer.com
Recore is a 3D-printer control board based on Linux. It has a quad core Cortex A53 CPU that runs Debian with Klipper and OctoPrint, but the real-time aspect is handled by a...
ReFactor - Thing-Printer
It is meant to simplify the lives of new users when they begin using a Thing-Printer controller board. Pre-built images of ReFactor are available for users who want to get up...
GitHub - goeland86/ReFactor: Linux distro for 3D-printers
The images generated are focused on being a boot-strapped firmware for Thing-Printer control boards, such as Replicape and Recore. However PRs to make ReFactor an image...
Everything Printing | Gilbertsville, PA – Printer ...
Your Source for Full Service Printing We offer all of today’s printing and copying services, from offsetting to digital printing. Contact Us learn more Need something designed...
Thing Categories - Thingiverse
Download files and build them with your 3D printer, laser cutter, or CNC. Thingiverse is a universe of things.
Page Resources Breakdown
Homepage Links Analysis
Website Inpage Analysis
| H1 Headings: | 6 | H2 Headings: | Not Applicable |
| H3 Headings: | 2 | H4 Headings: | Not Applicable |
| H5 Headings: | Not Applicable | H6 Headings: | Not Applicable |
| Total IFRAMEs: | 1 | Total Images: | 12 |
| Google Adsense: | Not Applicable | Google Analytics: | Not Applicable |
Two Phrase Analysis
| Words | Occurrences | Density | Possible Spam |
|---|---|---|---|
| is the | 3 | 0.815 % | No |
| is a | 3 | 0.815 % | No |
| Wiki YouTube | 2 | 0.543 % | No |
| and software | 2 | 0.543 % | No |
| you want | 2 | 0.543 % | No |
| It has | 2 | 0.543 % | No |
| Slack invite | 2 | 0.543 % | No |
| out The | 2 | 0.543 % | No |
| sold out | 2 | 0.543 % | No |
| Redeem Toggle | 2 | 0.543 % | No |
| on the | 2 | 0.543 % | No |
| YouTube Blog | 2 | 0.543 % | No |
| compatible LCD | 2 | 0.543 % | No |
| Manga Screen | 2 | 0.543 % | No |
| with a | 2 | 0.543 % | No |
| HDMI compatible | 2 | 0.543 % | No |
| LCD screen | 2 | 0.543 % | No |
| the first | 2 | 0.543 % | No |
| is ready | 2 | 0.543 % | No |
| Support for | 1 | 0.272 % | No |
Four Phrase Analysis
| Words | Occurrences | Density | Possible Spam |
|---|---|---|---|
| HDMI compatible LCD screen | 2 | 0.543 % | No |
| to contribute here is | 1 | 0.272 % | No |
| want to contribute here | 1 | 0.272 % | No |
| you want to contribute | 1 | 0.272 % | No |
| contribute here is the | 1 | 0.272 % | No |
| if you want to | 1 | 0.272 % | No |
| is the repository Get | 1 | 0.272 % | No |
| Get support Support for | 1 | 0.272 % | No |
| repository Get support Support | 1 | 0.272 % | No |
| the repository Get support | 1 | 0.272 % | No |
| but if you want | 1 | 0.272 % | No |
| here is the repository | 1 | 0.272 % | No |
| infancy but if you | 1 | 0.272 % | No |
| you want made It's | 1 | 0.272 % | No |
| stuff you want made | 1 | 0.272 % | No |
| the stuff you want | 1 | 0.272 % | No |
| print the stuff you | 1 | 0.272 % | No |
| want made It's in | 1 | 0.272 % | No |
| made It's in its | 1 | 0.272 % | No |
| its infancy but if | 1 | 0.272 % | No |
Mobile Friendly Check
Mobile Friendly : Unknown
Score : Unknown
No data to show.
Websites Hosted on Same IP (i.e. 194.63.249.211)
Vidunderpost - la ditt barn oppdage verden gjennom postkort
Vidunderpost - Oppdag verden gjennom postkort og digitale aktiviteter som gjør ditt barns verden litt større og mer spennende.
10,285,008 
$ 240.00
Jusleksikon.no
Jusleksikon.no er et gratis oppslagsverk med sentrale begreper fra hele det juridiske fagområdet og et nyttig hjelpemiddel for studenter, jurister og folk flest.
Not Applicable $ 8.95
CaptureLandscapes | Landscape Photography Tutorials & Courses
Landscape Photography Tutorials and Courses. Improve your landscape photography with in-depth tutorials, tips & tricks, inspirational stories and resources.
474,639 $ 9,000.00
HTTP Header Analysis
Status-Code: 200
Status: 200 OK
Server: nginx/1.10.3
Date: Tue, 12 Nov 2019 14:31:55 GMT
Content-Type: text/html; charset=UTF-8
Content-Length: 10161
Connection: keep-alive
Vary: Accept-Encoding,Cookie
Cache-Control: max-age=3, must-revalidate
Content-Encoding: gzip
Domain Information
| Domain Registrar: |
Domeneshop AS dba domainnameshop.com
|
|---|---|
| Registration Date: | 2013-09-05 1 decade 9 months 3 weeks ago |
| Last Modified: | 2019-07-17 4 years 11 months 2 weeks ago |
Domain Nameserver Information
| Host | IP Address | Country | |
|---|---|---|---|
| ns1.hyp.net | |
151.249.124.1 | Norway |
| ns2.hyp.net | |
192.174.68.10 |  Austria |
| ns3.hyp.net | |
151.249.126.3 | Norway |
DNS Record Analysis
| Host | Type | TTL | Extra |
|---|---|---|---|
| thing-printer.com | A | 3587 |
IP: 194.63.249.211 |
| thing-printer.com | NS | 3600 |
Target: ns2.hyp.net |
| thing-printer.com | NS | 3600 |
Target: ns3.hyp.net |
| thing-printer.com | NS | 3600 |
Target: ns1.hyp.net |
| thing-printer.com | SOA | 3600 |
MNAME: ns1.hyp.net RNAME: hostmaster.domeneshop.no Serial: 1573357979 Refresh: 14400 Retry: 3600 Expire: 777600 |
| thing-printer.com | MX | 3600 |
Priority: 10 Target: mx.domeneshop.no |
| thing-printer.com | TXT | 3600 |
TXT: v=spf1 include:_spf.domeneshop.no ~all |
| thing-printer.com | AAAA | 3587 |
IPV6: 2a01:5b40::4211:0:d297:3990:dfc4 |
Alexa Traffic Rank
Alexa Search Engine Traffic
Full WHOIS Lookup
Registry Domain ID:
1825785914_DOMAIN_COM-VRSN
Registrar WHOIS Server:
whois.domainnameshop.com
Registrar URL:
http://www.domainnameshop.com
Updated Date:
2019-07-17T04:18:29Z
Creation Date:
2013-09-05T14:20:16Z
Registry Expiry Date:
2020-09-05T14:20:16Z
Registrar: Domeneshop AS dba
domainnameshop.com
Registrar IANA ID: 1001
Registrar Abuse
Contact Email: [email protected]
Registrar Abuse Contact
Phone: +47.22943333
Domain Status: clientTransferProhibited
https://icann.org/epp#clientTransferProhibited
Name Server:
NS1.HYP.NET
Name Server: NS2.HYP.NET
Name Server:
NS3.HYP.NET
DNSSEC: signedDelegation
DNSSEC DS Data: 12202 13
2
B1B3534C60F1E55F892EA3E7384D604D050AFB8F5DEFB9AE2E10656526C1715A
U
RL of the ICANN Whois Inaccuracy Complaint Form:
https://www.icann.org/wicf/
>>> Last update of whois database:
2019-11-12T14:32:00Z
Similarly Ranked Websites
A.P.A.A. - Asociaţia Pacienţilor cu Afecţiuni Autoimune
Asociaţia Pacienţilor cu Afecţiuni Autoimune s-a înfiinţat din dorinţa de a oferi suport persoanelor şi familiilor celor afectaţi de aceste boli.
6,148,656 $ 240.00
Muhaddith: Islam books, search software, Quran audio, prayer download
Free online Islam books search, download Islamic software, Islamic Hadith, Islam Fiqh, Quran books & prayer times with holy Quran audio recitation
6,148,714 $ 240.00
LIZZO | One Year Anniversary of Cuz I Love You Album
Celebrate the one year anniversary of Lizzo’s GRAMMY Winning Album ‘Cuz I Love You’
6,148,972 $ 240.00
Cool Baby Clothes & Accessories - Geek Baby Clothes
Awesome collection of baby clothes and accessories featuring Star Wars, Harry Potter, Marvel, Game Of Thrones, Doctor Who, and other fandoms.
6,148,993 $ 240.00